Updated October 2026
Cambria is one of the best-known names in quartz countertops: an American-made, premium brand found in kitchens and bathrooms across the country. Because Cambria sells through dealers and fabricators rather than publishing retail prices, it can be hard to know what to budget. This guide explains where Cambria sits in the 2026 quartz market, what drives the price, and how it compares with other countertop materials.
About Cambria
Table of Contents
Cambria was founded in 2000 and makes its quartz surfaces in Minnesota. It is family-owned and positions itself as a premium brand, known for a wide range of designs, including marble-look patterns, and for a lifetime limited warranty on residential installations. Its slabs are sold through authorized dealers, kitchen showrooms and fabricators, who set the final installed price.
How much do quartz countertops cost in 2026?
Because Cambria doesn’t publish retail prices, the best guide is the overall quartz market:
| Source | 2026 quartz price range |
|---|---|
| Fixr (January 2026) | About $50 to $200+ per square foot installed, from commercial-grade to designer quartz |
| Slabwise (2026) | About $50 to $150 per square foot installed; most homeowners pay $70 to $100 |
As a premium brand, Cambria generally falls in the middle to upper part of these ranges, with standard designs priced lower and complex, high-demand or marble-look patterns priced higher. Fixr notes that installation labor typically runs about $10 to $35 per square foot, and that some exotic or translucent quartz designs can cost up to 50% more because of the custom manufacturing involved.
What a typical kitchen might cost
Kitchen countertop areas often fall around 30 to 50 square feet. At typical installed quartz prices, a mid-size kitchen commonly runs into the several thousands of dollars, rising toward five figures for large kitchens, islands and premium designs. Your fabricator will measure the exact square footage and quote by slab.
What affects the price of Cambria countertops?
- Design: popular whites, marble-look veining and newer collections usually cost more than simpler patterns.
- Number of slabs: you pay for whole slabs, so layouts that waste material cost more.
- Thickness: 3-centimeter slabs cost more than 2-centimeter slabs but often don’t need a plywood subtop or built-up edges.
- Edge profile: simple eased or square edges cost less than ogee, bullnose or mitered edges.
- Cutouts: undermount sinks, cooktops and outlets add fabrication time and cost.
- Seams and islands: large islands may require extra slabs or careful seam placement.
- Backsplashes: full-height quartz backsplashes add material and labor, though they create a seamless, easy-to-clean look.
- Removal of old countertops: typically extra, and more for heavy stone or tile tops.
- Location: fabrication and installation rates vary by region, with higher labor costs in large metro areas.
How countertop installation works
Knowing the process helps you plan your kitchen timeline:
- Choose your slab at a showroom or fabricator, ideally viewing the actual slabs for natural-look designs.
- Install cabinets first. Countertops are measured after base cabinets are set and level.
- Templating: the fabricator measures precisely, often with digital laser templating, and confirms sink, faucet and cooktop locations.
- Fabrication: slabs are cut, edged and polished in the shop, usually over one to two weeks depending on demand.
- Installation: most kitchens are installed in a day, with seams joined and sinks mounted.
- Plumbing reconnection: a plumber may need to reconnect sinks and faucets.
Have your sink, faucet and appliance specifications ready before templating, since cutouts depend on them.
Choosing a design you’ll love long term
- View full slabs or large samples, since veining looks different on a whole countertop than on a small chip.
- Check samples in your kitchen’s light, morning and evening.
- Coordinate with cabinets, floors and backsplash, bringing samples together.
- Think about wear: busy patterns hide crumbs and minor marks better than solid whites.
- Consider resale: neutral, timeless designs appeal to more buyers if you may sell in a few years.
Questions to ask your fabricator
- Is the quote per square foot or per slab, and how many slabs will my layout need?
- Where will the seams fall, and how visible will they be?
- What edge profiles are included in the price?
- Are sink and faucet cutouts, removal of old tops and disposal included?
- How long are templating, fabrication and installation?
- Are you an authorized Cambria fabricator, and how do you handle the warranty?
- How do you protect workers from silica dust?
Cambria vs other countertop materials
| Material | Typical installed cost (2026) | Pros | Cons |
|---|---|---|---|
| Quartz (including Cambria) | About $50 to $150+ per sq ft | Non-porous, no sealing, consistent look, durable | Not heat-proof; can discolor in strong sunlight |
| Granite | About $40 to $140 per sq ft | Natural stone, heat-resistant, unique slabs | Needs periodic sealing; patterns vary |
| Solid surface | About $35 to $75 per sq ft | Seamless, repairable | Less scratch- and heat-resistant |
| Laminate | About $20 to $50 per sq ft | Lowest cost, many designs | Less durable; can’t repair burns easily |
| Marble | Often high | Classic, luxurious look | Etches and stains easily; needs care |
Granite, solid surface and laminate ranges are from Slabwise’s 2026 guide. Quartz is two to four times the cost of laminate but far more durable.
Caring for quartz countertops
- Clean with mild soap and water; avoid harsh abrasives and strong chemicals.
- Use trivets and hot pads: quartz resin can be damaged by very hot pans.
- Use cutting boards to protect the surface and your knives.
- Wipe spills promptly, especially oils, wine, coffee and dyes.
- Avoid outdoor installations in strong sun unless the manufacturer approves, since UV light can discolor quartz over time.
- No sealing needed, unlike granite and marble.
A safety note: engineered stone and silica
Engineered stone like quartz contains high levels of crystalline silica. Cutting and grinding slabs during fabrication can create dangerous dust, and health authorities have linked unprotected exposure to serious lung disease (silicosis) among countertop fabrication workers. Federal OSHA silica rules and new state regulations, such as California’s, require controls like wet cutting, ventilation and respiratory protection. Finished, installed countertops don’t pose this risk to homeowners, but it’s reasonable to ask your fabricator how they protect their workers.
How to buy Cambria countertops
- Visit a Cambria dealer or showroom to see full slabs, since patterns look different on a large surface.
- Get quotes from two or three fabricators for the same design, thickness, edges and layout.
- Ask how many slabs the job needs and where seams will fall.
- Confirm what’s included: templating, fabrication, installation, sink cutouts, removal and disposal.
- Register the warranty after installation.
- Check reviews for each fabricator.
Example: budgeting for a kitchen remodel
A homeowner planning a kitchen with about 45 square feet of countertops compares a popular Cambria design with a less expensive quartz brand and with granite. Using the typical quartz range of about $70 to $100 per square foot installed, they budget about $3,150 to $4,500 for a mid-range quartz, then get fabricator quotes for Cambria, which come in higher for the marble-look design they love. They decide to use Cambria on the island and a lower-cost quartz on the perimeter to balance budget and style.
This example is illustrative; get local quotes.
For contractors and remodelers
Countertops are a high-visibility part of kitchen and bath projects. Partnering with reliable fabricators, explaining materials honestly, and building countertops into remodeling packages can raise average job value. See our bathroom remodeling cost guide, home improvement opportunities report and the home services industry profile.
Frequently asked questions
Is Cambria worth the price? Many homeowners value Cambria’s designs, American manufacturing and warranty. If budget is tight, other quartz brands can offer a similar look for less.
Does Cambria need sealing? No. Quartz is non-porous and doesn’t require sealing.
Is Cambria heat-resistant? It’s durable, but like all quartz, it can be damaged by very hot pans, so use trivets.
Can Cambria be used in bathrooms? Yes. Quartz is popular for vanities and shower surrounds because it’s non-porous and easy to clean, and smaller bathroom projects can sometimes use remnant pieces at lower cost.
What are remnants, and do they save money? Remnants are leftover pieces from larger jobs. Fabricators often sell them at a discount, which works well for small vanities, bars or laundry rooms.
How long do quartz countertops last? With normal care, quartz countertops can last for decades, often as long as you keep the kitchen.
Next steps
Read our bathroom remodeling cost guide, home improvement opportunities report and the home services industry profile.
Prices are 2026 quartz market ranges from published cost guides; Cambria pricing is set by local dealers and fabricators. Get several local quotes.
Sources
- Fixr, How much do quartz countertops cost? (January 2026)
- Slabwise, Quartz countertop cost per square foot (2026)
- Cambria
- OSHA, Engineered stone and silica hazard
Last reviewed October 20, 2026. Startup costs are estimates; check local prices, licensing and tax rules before you commit money.
This article is general information, not financial, legal or tax advice. Check the rules that apply to you or talk to a qualified professional before making decisions. See our disclaimer.

Slightly cheaper than quarried natural granite, engineered granite costs between $50 and $100 per square foot, installed. These man-made slabs are composed of about 95 percent granite and 5 percent polymer resins. Great post and useful information!